1331 Lincoln Hwy,

Levittown, PA. 19056

Mon-Sat 7:00am-7:00pm

Sunday 10:00am-6:00pm

Mon-Sat 7:00am-7:00pm

Sunday 10:00am-6:00pm

1331 Lincoln Hwy,

Levittown, PA. 19056

Replacing Your Water Heater? How To Know The Best Time

When to change the Hot water heater in your house?

If your hot water heater is more than 10 years old, it may be time to change it. When shopping for a new water heater, keep these energy-efficient options in mind.

 

A hot water heater’s tank ought to last six to twelve years with excellent upkeep, nevertheless, tankless hot water heater can last as much as twenty years.

 

For the most current due dates, you ought to consult your warranty.

How can you tell when it’s time to replace your water heating unit? A hot water heater that is frequently kept and repaired as needed can last for lots of years. You have actually more than likely been utilizing the very same water heater since you moved into your existing residence.

All excellent things must definitely come to an end, and you will need to change the water heater at some time in the future when it can no longer do its job.

 

You may initially think about having the water heater repaired, but there are indications to look for that will assist you decide whether to change the hot water heating unit in your house.

Here are 5 clues it’s time to change your water heater:

None of these symptoms are a sure signal that it’s time to change the hot water heater. Before making a conclusion, always consult with a proficient plumbing company. The plumbing professional can advise you if the repairs are still worth your while.

Age

In a common residence, how much time do hot water heater last? A lot of systems have a life expectancy of 15 to 20 years. Even though the existing water heater is in good working order, it is usually best to set up a new system if it is more than 20 years old.

 

A drop due to age will take place soon, and it is smart to get ahead of it by purchasing a new water heater.

The amount of hot water lost

A low amount of hot water is another clear clue that it is time to change your hot water heater. These are clues that your water heater is on its last leg and should be changed.

Decay

You shouldn’t detect rust on your water heater up until it’s rather old. If it does take place, it is usually permanent, and you will need to change your water heater.

Water reddish discoloration

This suggests that the inside of the hot water heater tank is rusting if you turn on the taps and see a reddish tint to the hot water.

Regular repairs

Keeping track of the overall amount of times a hot water heating unit requires to be fixed in a year is a very good method to determine when it is time to change it.

 

Your residence’s water heater should just need to be serviced twice a year.

Some jobs are better left to the pros...

Consult a Pro. Get No-Commitment Estimates For Your Project.

pro advice

Electric vs. Gas Water Heaters: How To Choose?

Learn about the benefits and drawbacks of each fuel source, as well as newer, more effective types of hot water heater that might conserve you cash in the long run.

 

If you have actually had the very same hot water heating unit for more than 10 years– the typical life-span– a great idea would be to consider replacing it before it breaks down and puts you in a bind.

 

Nevertheless, before you begin buying a new hot water heater, you must first decide whether it should be gas or electric powered. While both types are extremely quite similar, there are noteworthy distinctions in regards to features and effectiveness in between the two.

The option in between gas and electric powered water usually comes down to the kind of power presently present in the residence.

A lot of times, property owners just go with whatever the residence already has. Nearly every residence has electrical energy, and many have both gas and electrical energy.

 

Nevertheless, if you simply have electrical energy, the decision is easy: You need to choose an electric powered hot water heater.

 

Electric powered hot water heating systems may not be the only option for rural locals who do not have access to gas. If they have gas, they can utilize a gas water heating unit.

 

Both gas and electric powered hot water heater are graded by “input,” which is a measurement of just how much gas or electrical energy is used each hour to warm the water in the tank.

 

BTUs are used to measure gas input, while watts are used to measure electrical input.

Electric vs Gas Water Heater
  • A gas hot water heater’s typical input score ranges from roughly 30,000 to 180,000 BTUs, depending on size. The higher the BTU score, the faster the device will warm water.

  • The power input of electric hot water heater ranges from around 1,440 to 5,500 watts, and the very same idea applies– the higher the wattage, the faster the device will warm water.

Gas hot water heater have higher starting costs than comparable electrically powered hot water heater, but they can also be less expensive to run.

The cost of a water heater differs mostly depending on how big, efficient, and high quality your hot water heater is. Usually, the higher the cost, the better the equipment will perform. A gas hot water heating unit, on the other hand, will cost more upfront than a comparable-size electrically powered hot water heating unit.

 

On the other hand, it is usually less expensive to run a gas hot water heater due to the fact that the expense of gas is lower in a lot of locations of the country than the expense of electrical energy.

 

Depending on where you are, you might prefer one over the other. Your regular monthly expenses are what will impact you in the long run.

 

While the expense of a water heater is crucial, it should not be your only choosing aspect. Your decision should take into account the expense of operation, effectiveness, and performance.

Electric powered hot water heater (specially electrically powered heatpump hot water heater) can have EF scores that are higher than gas hot water heater.

The energy factor (EF) of a gas or electrically powered hot water heater is a measurement that compares the volume of hot water produced per day to the volume of fuel used.

 

The more dependable the water heater, the higher the EF value. While the performance of gas and electrically powered designs is usually equivalent, especially when comparing designs of the very same manufacturer and size, particular types of electric-powered designs– including heatpump and hybrid heatpump systems, as talked about below– have the performance edge.

 

The EF score of a water heater can be looked for on the device’s box or in the literature that comes with it. Every brand-new traditional water heater must have a vivid yellow and black Energy Guide label that shows the device’s energy factor as well as the following information:

 

  • The kind of fuel the water heater utilizes.
  • Its estimated annual operating cost.
  • The estimated volume of energy used annual (BTUs or watts).
  • An Energy Star emblem (if the water heater satisfies Energy Star requirements for hot water heater).
  • Tank size (in gallons).
  • First-hour score (see listed below).

You will not have the ability to see the Energy Guide label if you go shopping online, but reputable vendors offer all technical specifications about the designs they sell, so you’ll have all the facts you need to make an educated decision.

A number of types of gas and electric hot water heater are more energy-efficient by design.

Neither fuel type guarantees the highest effectiveness; nevertheless, suppliers have created extremely energy-efficient subcategories of hot water heater for each kind of source of power.

Efficient Gas Water Heaters

Energy Efficient Gas Water Heaters

Condensing water heaters recirculate and catch energy that would otherwise be lost in order to improve the overall effectiveness of the device.

 

Condensing units capture and recycle hot water vapor, in contrast to common (non-condensing) gas hot water heaters, which route hot water vapor down a flue and exhaust it out of the house.

 

Of course, these units have disadvantages and advantages:

 

  • Condensing water heaters are more pricey than comparable non-condensing units.
  • Operating costs are lower for condensing hot water heaters.
  • Condensing water heaters have higher first-hour scores and recovery rates than non-condensing systems.
  • A set up gas line is required.
Types High Efficiency Condensing Water Heaters

Energy Efficient Electric Powered Water Heaters

The heat pump hot water heater is the peak of performance in electrically powered hot water heaters. This water heating unit is most suited for usage in warm regions due to the fact that it draws heat from the air.

 

Heat pump systems are more pricey than non-heat pump ones (about $800 to $2,500 more than a general electrically powered model), but they are the most energy-efficient hot water heaters on the marketplace today.

 

Hybrid heat pump hot water heaters allow the customer to choose a number of working modes for different scenarios, therefore increasing the device’s performance.

 

A lot of hybrid heatpump units, for instance, provide a “vacation” mode that decreases overhead while nobody is at home.

 

Depending on the model, selecting a hybrid heatpump over a regular water heater can conserve you as much as 80% on hot water expenses. These appliances, nevertheless, must be installed in an area of a minimum of 1,000 square feet, so while they are suited for a big garage, they are not suited for a small utility closet.

Types Tankless Water Heaters

Efficient Water Heaters Powered by Gas or Electricity

Tankless hot water heaters, frequently called “on-demand” or “point-of-use (POU)” hot water heaters, are readily available in both gas and electric designs. When a device or a faucet is turned on, these smaller sized setups suck water in through a heating element.

 

They can be as much as 35% more energy highly effective than basic tank-type hot water heaters considering that they warm water as you utilize it. Condensing or non-condensing gas tankless hot water heaters are readily available.

 

They have a limit on just how much hot water can be pumped out at once, so select the appliance based on just how much hot water you’ll need. Because they do not hold hot water, recovery and first-hour scores do not apply (see listed below).

 

Instead, tankless hot water heaters are sized based on their “flow rate,” which is measured in gallons per minute (GPM).

Gas hot water heaters tend to warm up quicker.

Because of its combustion, gas generates heat faster than an electric heating element. As a result, the recovery rate and first-hour score (FHR) of gas hot water heaters are higher than those of equivalent electric units with the very same manufacturer and tank size.

 

(You can find these scores on the system’s description on the merchant’s or manufacturer’s website).

 

  • The amount of water that the system can warm an additional 90 degrees Fahrenheit gradually is suggested by the recovery rate, which is measured in gallons per hour (GPH)
  • When the water in the tank is fully heated up, the FHR demonstrates how much hot water the heating unit can give in the first hour. The higher the FHR, the more efficient the water heater.

An electrical water heater setup could be a Do It Yourself task.

An inspired do-it-yourselfer with basic electrical expertise can usually change an electric hot water heater and conserve setup expenses (about $350 to $450, depending on the location areas of the country will have differing pricing).

Replacing a gas water heater, which requires removing and reconnecting a gas line, is a completely separate procedure. Gas lines must be moved during setup, and gas and gas hot water heaters (except condensing types) must be vented to the outside.

This is not a job that the typical house owner has the ability to do; rather, it is recommended that the setup be handled by a professional.

 

If a house presently has a gas water heater, a plumbing contractor will charge $400 to $550 to remove the old system and set up the brand-new one, despite whether it is a tank or tankless model. Nevertheless, switching from electric to gas may cost an additional $1,500 to $2,300 in setup costs due to the need to run a new gas line and set up venting.

 

The kind of water heater (tank or tankless, for instance), rather than the source of power, will decide the length of time it lasts.

 

Tank hot water heaters last 10 to 13 years on average for both gas and electric, whereas tankless units can live up to 20 years or more. Electric heatpump hot water heaters have a life expectancy of 12 to 15 years on average.

 

Whatever kind of water heater you select, whether gas or electric, you will get the most useful life out of it if you constantly follow the manufacturer’s annual service and upkeep schedule.

Some jobs are better left to the pros...

Consult a Pro. Get No-Commitment Estimates For Your Project.

Proud to Install, Repair, and Service the Following Brands: