1331 Lincoln Hwy,

Levittown, PA. 19056

Mon-Sat 7:00am-7:00pm

Sunday 10:00am-6:00pm

Mon-Sat 7:00am-7:00pm

Sunday 10:00am-6:00pm

1331 Lincoln Hwy,

Levittown, PA. 19056

How To Improve Water Pressure Heres 5 Good Ways

Low Water Pressure In Your House? Quick Fixes…

A poor shower to begin and end a long day is really undesirable. Still, when other residential repair work take top priority, you every once in awhile have to learn to cope with low water pressure.


Fix to totally obtain a great flow of water by trying any of the approaches listed below, which vary from little adjustments to large-scale tasks.

Speak with Your Next-door neighbors

First: Consult your next-door neighbors to see if they are having a similar problem.  The problem might be with the city’s public water supply if this is the case.


These systems, like your home’s piping, are prone to leakages, obstructions, accumulation, and deterioration.

Q: What is the cause of low water pressure? Can I fix it myself?

A: The typical water pressure at a residence’s inlet valve ought to be around 40 to 50 psi. Your residence might still have lower water pressure than desired for a variety of factors.


  • Where you discover it can help you determine what’s causing the problem and whether or not you can fix it yourself.
  • Low water pressure in your area, for example, is more than likely an issue that needs to be attended to by the local utility.
  • Whereas, low water pressure at a certain home appliance can typically be traced down to a stopped up aerator or a leakage in the water line going to the home appliance.

Some jobs are better left to the pros

Consult a Pro. Get No-Commitment Estimates For Your Project.

Check the Water Pressure Yourself

You can check the city water pressure yourself before calling your local supplier by using a test gauge with a hose connector.


Simply screw the device onto a hose faucet and switch on the water, after switching off the rest of your residential property’s faucets and any water-using appliances (such as the dishwashing machine and washing machine).

Professional plumbers admit that readings of 45 or 50 psi are on the low side, 60 is a great reading, and 80 or higher is severe.


You can choose what actions to take next after you have either eliminated or confirmed a pressure problem.

Clear the Obstructions

Mineral deposits can integrate in your pipes in time. In serious cases, the diameter of the pipes diminishes to the point that they get blocked, preventing water from easily flowing.


Leaving you with a pitiful drip in the shower or a small drip from the faucet.


While extreme cases might require the replacement of sections of pipeline, you might at least avoid obstructions at your system’s exit points. Clearing up and dissolving any minerals that are clogging the inside faucet fittings and shower heads will certainly help.


Here is how: Simply lay an open zip-lock bag filled with vinegar over your shower head or faucet, secure it with string, and leave it to soak overnight. The next day all that requires to be done is rinse your cleared up fittings.

Get in touch with a plumbing service to take a look at and fix the problem if this method does not work and you presume a more severe mineral blockage inside the pipelines.

Completely Opened

The following technique takes just a couple of minutes of search. The flow of water into your residential property’s pipelines is controlled by the main water valve, which is generally found near the meter.


Locate the valve and ensure that it is entirely open.


If, for example, your pressure drop might be due to a current residential property remodeling work. Your contractor might have cut off the main water system and just partly reopened the valve at the end of the job.


As a result, flow is limited and pressure is decreased. Luckily, you can change the valve yourself, preventing the requirement for a plumbing professional.

Replace the Regulator

A lot of properties that utilize public water have a regulator, which is either installed at the meter or where the service line goes into the property and guarantees that water does not rush through the pipelines.


When the regulator stops working, the pressure goes down, resulting in a loss of speed that affects some or all of your property’s fixtures.


To resolve the problem, either reset or replace this part or even better, work with a plumbing professional to handle the job for you.

Look for Leaks

Water leakages caused by split or damaged pipes can draw out water as it flows through your pipes. Leaving you with at most a drip at the tap.


To inspect if your primary pipeline is damaged, switch off all faucets inside and out, then switch off the water valve in your home and note the number that shows on your water meter.

Return in 2 hours and take another reading from the meter. Increasing reading shows a leakage and might suggest that it is time to contact a pro.

Galvanized steel pipes are more vulnerable to deterioration in time, so if you choose to replace them, go with good quality plastic or copper pipes. You ought to not feel obligated to do this particular repair yourself:


Pipeline replacement requires the services of a proficient plumbing contractor. While it is a pricey task, replacing your pipelines will do more than at most improve your showering experience.


In addition to increasing pressure and lowering the probability of future leakages, replacing old plumbing with new can lower the possibility of corrosives contaminating your drinking water, resulting in better quality water.

Add a Booster Pump for Water Pressure

It’s possible that the problem isn’t with your plumbing, but with in the region. Gravity and distance are 2 significant issues that decrease water pressure.


The pressure might be decreased if your home water supply is forced to travel uphill or a prolonged distance from the local water source.


When it reaches your property, think about adding in a water pressure booster pump to better the flow rate of the water.


The pump costs around $200 or $300, not including the charge of setup (better entrusted to a qualified plumber) and the likely rise in your regular monthly electrical energy costs.

Some jobs are better left to the pros

Consult a Pro. Get No-Commitment Estimates For Your Project.

Proud to Install, Repair, and Service the Following Brands: